|
Vol.10, No.3, August 2021. ISSN: 2217-8309 eISSN: 2217-8333
TEM Journal
TECHNOLOGY, EDUCATION, MANAGEMENT, INFORMATICS Association for Information Communication Technology Education and Science |
Evaluation of the Yield Strength of a Carbon Composite Material Prepared by Wet Lamination and Vacuum Bag Molding
Radoslav Vandžura, Vladimír Simkulet, Michal Hatala, Darina Dupláková, František Botko
© 2021 Darina Duplakova, published by UIKTEN. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License. (CC BY-NC-ND 4.0)
Citation Information: TEM Journal. Volume 10, Issue 3, Pages 1045-1050, ISSN 2217-8309, DOI: 10.18421/TEM103-06, August 2021.
Received: 18 May 2021. Revised: 01 July 2021.
Abstract:
To evaluate tensile strength of the carbon composite material we used method of static tensile test according to the STN EN ISO 6892-1:2010-01 standard. The material for the production samples from the composite material was carbon fabrics KORDCARBON 200g/m2 – Twill weave. KORDCARBON 160g/m2 – Plain weave reinforced with epoxy resin Letoxid PR220+hardener EM315. The carbon composite for the test was prepared by Hand lay-up technology and Vacuum Bag molding method. Orientation to the layer laying direction of the individual samples in the test composite material influences the mechanical properties of the carbon fiber composite material produced by Hand lay-up technology and VMB- Vacuum molding bag method.
Keywords –Carbon fibre, Composite materials, Vacuum Bag Molding, Tensile test. |
|
----------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------- |